Changes between Initial Version and Version 1 of KeyboardSetup


Ignore:
Timestamp:
Dec 16, 2023, 2:29:14 PM (2 years ago)
Author:
oleg
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • KeyboardSetup

    v1 v1  
     1= Keyboard Setup
     2
     3== Connections
     4
     5Keyboards are connected to the mixer via what are called "direct input" boxes. TSC has two models of these - ProCo CB-1 and Rapco db 100. They should be functionally identical. Here is what the Rapco box looks like:
     6
     7[[Image(/static/img/rapco-db-100-top.jpg,width=400)]]
     8[[Image(/static/img/rapco-db-100-qtr.jpg,width=500)]]
     9[[Image(/static/img/rapco-db-100-xlr.jpg,width=500)]]
     10
     11The first photo is the top view. On one end of the box are three 1/4" jacks: input, pass-through output and ground lift. On the opposite end of the box is an XLR male jack.
     12
     13Make the following connections:
     14
     15- Connect a 1/4" to 1/4" balanced (TRS) cable from the keyboard to the input jack (the one marked "Inst High Z In") on the DI box.
     16- Connect an XLR cable from the XLR jack (the one marked "Low Z Output") on the DI box to the mixer.
     17
     18Optionally, if the musician playing the keyboard requests it, connect a 1/4" to 1/4" balanced (TRS) cable from the 1/4" pass-through jack (the one marked "Inst High Z Out") on the DI box to the piano monitor (the one closest to the keyboards).